Crack sealer
Our crack sealer acts as a reinforcer for extremely porous substrates, extending their service life. It seals cracks in screeds, concrete structures and is used to seal the surface, protecting the floor from deterioration.
Plastifloor® resins are used for the productionof high-strength and low-shrinkage polymerconcretes.
Plastifloor® resins are used for the productionof high-strength and low-shrinkage polymerconcretes.
Plastifloor® resins are used for the productionof high-strength and low-shrinkage polymerconcretes.
Function overview PF 114
Due to its low viscosity, the resin is rather thin and flows easily into even very small cracks and fills them evenly. It enables easy entry and filling of deep cracks in existing concrete. It bonds well with the inner walls of the cracks, restoring much of the original strength and preventing further crack propagation. At the same time, the significantly lower modulus and higher tensile elongation ensure better compatibility with moving cracks and thermal stresses.
Application & application area
Only minimal effort and no special equipment is required to apply the crack sealer. Application to concrete surfaces and structures also reduces chloride permeability and protects against further deterioration. The sealant is often used on runways for airports, parking garages, industrial floors, garages, concrete elements and concrete roadways.
Particular attention must be paid to thorough cleaning and removal of any substances before application, otherwise optimum adhesion cannot be guaranteed.
Products for crack sealer system:
Discover the products for this system that set our crack sealer apart from the competition. We pride ourselves on providing the highest quality products and services to meet the unique needs of our customers.
PF 114
Quick-curing injection resin of low viscosity for
concrete and cement screeds
PF 112
After the treatment,
the ground has to be additionally primed with Plastifloor® 112
115 B
Solvent-free PMMA
resin for primer, sealer
or scratch coat for concrete roadway panels
PF 50 W
Hardener powder for PF® coating resins - must be mixed well with the PF resins to ensure good curing.
PF 050F/051
Synthetic resin
mortar-system for
extremely loaded areas, runway repairs
Reference
CRACK TREATMENT
CASE STUDY:
